Mounted
Floor-Mounted
For a permanent barre in the middle of the room or in front of a mirror. Space-saving brackets that tuck behind curtains for a multipurpose room. Single at 1050mm, or double with a lower rail at 870mm.
Floor-mounted, wall-mounted and freestanding ballet barres, made in-house in Preston from powdercoated steel and 45mm Tasmanian Oak dowel. Every bracket is load-tested beyond the Australian standard, so the barre holds up to stretch and resistance work, class after class. Single or double, black or white, cut to the length of your room.
The brackets are powdercoated steel, made in Preston in black or white and load-tested past the Australian standard. The dowel is 45mm Tasmanian Oak, triple-sanded and finished three times with Danish oil.
Available as a single barre or a double - with a lower rail for younger dancers - and cut to suit the room.
Request a quote →Fix it to the floor, mount it on the wall, or wheel it where you need it. Every barre runs on the same steel and Tasmanian Oak.
For a permanent barre in the middle of the room or in front of a mirror. Space-saving brackets that tuck behind curtains for a multipurpose room. Single at 1050mm, or double with a lower rail at 870mm.
The way to run a long barre down a large studio wall. Mounts to any solid surface, spaced 1.2 to 1.8 metres, at 1050mm to the top rail. Double adds a lower rail 180mm below for younger students.
Our go-to freestanding barre for flexible studio space. A solid double-barrel base supports a barre long enough for up to four dancers. Height-adjustable from 700 to 1050mm, packs flat for storage.
A fully professional barre for the spare room. A lighter steel base with our standard Tasmanian Oak barre - safe on carpet, vinyl or timber, and just as adjustable.
One build standard across the range - cut, finished and delivered to suit your studio.
Tell us the wall length, the height of your dancers and whether you need a lower rail, and we will pre-cut the dowel and finish the barre to suit - in black or white, mounted or freestanding.
Made in Preston, delivered Australia wide.
Request a quote →A double barre adds a lower rail for younger or shorter dancers - 870 mm on the floor-mounted double, or 180 mm below the top rail on the wall-mounted double. A single barre sits at the standard 1050 mm.
Mounted barres are set at a standard 1050 mm to the top rail. The freestanding portable barre is fully height-adjustable from 700 mm for the smallest dancer up to 1050 mm.
Powdercoated steel brackets and bases, made in Preston in black or white, with a 45 mm Tasmanian Oak dowel that is triple-sanded and finished three times with Danish oil.
Installation is available across the Melbourne metro area, and we deliver Australia wide. Wall brackets mount to any solid surface, spaced 1.2 to 1.8 metres apart.
Tasmanian Oak dowel comes in 1800, 2400 and 3600 mm lengths and can be pre-cut to fit your room. The portable studio base supports a barre long enough for up to four dancers.
Yes. Every bracket is load-tested and exceeds the Australian standard, which makes the barres suited to stretch classes and resistance work.
Tell us the room and the dancers, and we will spec the barres, cut the dowel and finish them to match.
Request a quote →